TOUCH BUILDER GEL is a construction, camouflaging, three-phase gel (except Clear) that is very comfortable to work with, thanks to its consistency, it is easy to self-level. The gel is ideal for modeling nails, as it holds the arch well and does not shrink the nails. It is suitable for working in the dust-free technique, and if you need to file, it is easy to file, does not clog the file, and is cut with light dust. In addition to modeling, it is suitable for strengthening, restoration along the length and restoration with extension. Due to its viscosity, it is also suitable for building up on upper forms.

ADVANTAGES OF TOUCH BUILDER GEL:

- Gel of medium consistency, more to thick

- Has a high hardness

- Quick to apply

- Does not burn in the lamp

- Does not crumble

- Holds the arch well and does not shrink on long nails.

- Hardens for 15 seconds

- Medium pigmentation

- Masks unevenness of the nail plate

- For strengthening/extension/repair, and volumetric designs

- For extensions on top of the nail plate

- Easy to file

FEATURES :

Suitable for nail strengthening, restoration, and extension. An elastic base is required for the base. If you perform strengthening, you need to cut the natural nail from under the bottom.

METHOD OF APPLICATION:

- Standard preparation of the nail plate, namely:

- Filing with a 240 grit surface file or buffer

- Degreasing the nail plate

- Application of a dehydrator

- Apply the primer/ultrabond (acid-free primer) with a semi-dry brush without touching the skin. It is best to apply to the end of the nail without layering.

- Apply the elastic transparent base in a thin or rubbing layer.

- Dry it.

- Remove the sticky layer from the base

- Perform nail extension or strengthening

- When strengthening, be sure to cut the natural nail from under the bottom

- If you work on short nails, file the length after laying out the material

Drying time: 60 seconds in a 48W LED lamp