Komilfo Blending Solution for Aqua Drops, clear base for aqua drops, 5 ml

KOMILFO AQUA DROPS APPLICATION TECHNIQUE:

1. Perform standard nail preparation: remove any previous coating, push back the cuticles, buff the surface, and shape the nails as desired. Afterward, it is recommended to clean the nail plate with a disinfectant and degreaser. If necessary, apply UltraBond—a special acid-free formula designed to improve the adhesion of subsequent coatings to the natural nail.
2. Apply a thin layer of Komilfo base coat for gel polish to the nail, then cure it under a UV lamp (2 minutes) or an LED lamp (30 seconds).
3. Apply 2 coats of Komilfo colored gel polish. Be sure to cure each coat (including the base and top coats). The curing time for colored gel polish in an LED lamp is 30 seconds. For UV and low-wattage lamps, we recommend applying the colored gel polish in a thin layer due to its high pigmentation. The curing time in a UV lamp is 2 minutes.
4. Note: If you plan to use highly pigmented gel polishes, your UV lamp must be at least 36 W, and your LED lamp must be at least 9 W. Replace the bulbs in a timely manner.
5. Apply Komilfo Blending Solution as a base coat over the colored gel polish.
6. Use Komilfo Aqua Drops in various colors to create your own unique design.
   Komilfo Aqua Drops AIR-DRY for 2–3 minutes! Then buff the edges.
7. Apply a thin layer of rubber base coat over the design. Cure in an LED lamp for 30 seconds or in a UV lamp for 2 minutes.
8. Apply a thin layer of Komilfo top coat for gel polish, then cure it under an LED lamp for 90 seconds. Under a UV lamp, cure it for the maximum time indicated on the timer.
9. After finishing the manicure, apply cuticle oil.

Ingredients:

Butyl Acetate, Ethyl Acetate, Alcohol.