HEYLOVE Smart Builder Gel, Pastel Yellow, 15 ml

Hug – a warm pink, like a gentle hug.

A liquid builder gel in a bottle. It allows for quick nail extensions without filing, strengthens natural nails, and evens out and corrects imperfections in the nail plate.

During curing, the product does not heat up and does not cause discomfort.

Collection: Tactile

Consistency: liquid

Hardness/flexibility: medium flexibility

Directions for use:

1. Buff the nail plate with a 180-grit file or a 100-grit polisher.
2. Wipe with a degreaser, removing dust, especially under the cuticle and in the side grooves.
3. Apply the phBond dehydrator and wait 30 seconds for the moisture to evaporate.
4. Using rubbing motions, apply a layer of rubber base and add a small amount more of the base to achieve a smooth surface. Cure for 30 seconds.
5. After curing, remove the dispersion (sticky) layer from the base, especially under the cuticle.
6. Apply Smart Gel in an architectural layer. Cure for 30 seconds, then cure both hands again for 1 minute.
7. Remove the tacky layer from the Smart Gel.
8. If necessary, file the surface and be sure to file the edges to achieve the desired gel thickness.
9. Apply a top coat as the final layer. Cure for 1–2 minutes.
10. Using a “corn”-shaped carbide bit, trim the natural nail from the underside in the free edge area.
11. Carefully buff the tip with a file to avoid damaging the surface of the gel.
12. Wipe with a damp cloth to remove dust, then apply cuticle and hand care products. Done!

Volume: 15 ml

Manufacturer: TM “HEYLOVE”

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone.
May contain: Cl 45380, CI 15850, Cl 77491, CI 15985, CI 77492, CI 77007, Cl 77510, Cl 77742, Cl 77289, Cl 77499, Cl
77891, CI 77000.

Warning! To prevent unwanted polymerization of the material during work, testing, or filming, keep open packages or brushes as far away from daylight as possible (especially direct sunlight). Please also keep in mind that even on cloudy days, clouds allow a significant amount of ultraviolet radiation to pass through, which is sufficient to cause the material to begin polymerizing. When painting nail tips, we recommend pointing the working side of the turned-on UV lamp away from the nail technician. If the light from the turned-on lamp is directed toward the technician, this may cause unwanted polymerization of the material on the brushes and on the necks of open bottles.