Luna Gel Premium No. 13, 50 ml

Premium Classic Nail Extension Gel is a polymer-based light-curing material that, thanks to its strength, allows for significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• It is shock-absorbent and does not crack upon impact.
• It has a medium consistency.
• It has medium pigmentation and covers the free edge.
• Suitable for the “no-filing” extension technique.
• Suitable for extensions “on top forms.”
• Does not cause a burning sensation under the lamp.
• It becomes thicker in cold temperatures and thinner in warm temperatures.
• Thixotropic—becomes thinner when stirred with a brush during application.
• It can be reheated to make the gel thinner.
• It hardens at a thickness of 1 mm. If the thickness is less than 1 mm, it may flex slightly, but this does not affect wear.
• It doesn’t shrink and holds the arch well.
• It absolutely requires a Rubber Base as a base coat.
• The wavelength for polymerization is 365–405 nm.
• UV/LED lamp power: 36–48 W.
• Permissible coating thickness: 0.5 mm at the edge / 1 mm at the apex.
• Full curing time: 120 seconds.

Application method: 

REINFORCEMENT

1. Removal.
2. Do not file the nail shape, or leave 2 mm in length, which will be removed after leveling.
3. File the top of the nail with a 220-grit file without applying too much pressure, lifting the scales of the nail plate, or use a 100-grit buff.
4. Perform a manicure.
5. If you’re using removers, wash your hands with soap after using them.
6. Degrease the nail using LUNAmoon Nail Prep. Perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: Take an orange stick, place a wipe on it, and wipe the entire cuticle area and the nail grooves.
7. Use a primer if desired, but if the base coat has sufficient acidity, it is not necessary.
8. The LUNAmoon Rubber Base is best applied with a flat gel brush. Use a rubbing motion. Fill in all the nail grooves and cure under the lamp for 60 seconds.
9. Remove the tacky layer.
10. Level the surface. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after smoothing. This is necessary to create thickness at the edge of the nail that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file off 1 mm of the natural nail from the inside. This will prevent the material from peeling off. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, remove the tacky layer and apply gel polish.
14. Apply a top coat. Cure for 120 seconds. After curing, do not wipe it with anything, as this may cause the shine to fade.

CLASSIC NAIL EXTENSIONS

1. Removal
2. Trim the nail length to 1 mm and shape it into a round shape.
3. Using a 220-grit file, gently file the top of the nail without applying too much pressure, lifting the scales of the nail plate, or use a 100-grit buff.
4. Perform a manicure.
5. If using removers, wash your hands with soap after use.
6. Degrease the nail using LUNAmoon Nail Prep. Perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the surface of the nail. Second pass: Take an orange stick, place a wipe on it, and wipe the entire cuticle area and the nail grooves.
7. Apply the LUNAmoon primer.
8. The LUNAmoon Rubber Base is best applied with a flat gel brush. Use a rubbing motion. Fill in all the nail grooves and cure under the lamp for 60 seconds.
9. Remove the tacky layer.
10. Apply the nail form to the free edge of the nail.
11. Apply clear gel to shape the artificial nail. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe away the tacky layer and any excess dust.
14. Apply another coat of LUNAmoon Rubber Base to the areas where you filed. Cure for 30 seconds.
15. Smooth the gel, place the nail under the lamp, and clamp it at the 10–15-second mark. If the gel is very sticky or contains glitter, clamp it at the 20-second mark.
16. Cure in the lamp for 120 seconds.
17. Wipe off the tacky layer before applying the gel polish.
18. Apply a top coat. Cure for 120 seconds. Do not wipe the nails after curing, as this may cause the shine to fade.

Ingredients INCI: Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510

Shelf life: 24 months. Once opened, store for no more than 18 months.

TPO FREE
(Product photos on the website may differ from the actual product)