The classic Premium gel is a polymeric light-curing material that, due to its strength, allows you to significantly lengthen the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• It is shock-absorbing and does not crack during impacts.
• It has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Suitable for the technique of "building without filing".
• Suitable for "over the top" extension.
• Does not cause burning in the lamp.
• It becomes thicker in the cold and thinner in the heat.
• Thixotropic - it becomes thinner if you move the brush during work.
• It can be further heated to make the gel thinner.
• Solid at a thickness of 1 mm. If the thickness is less than 1 mm, it can bend slightly, but this does not affect the wearing experience.
• Does not shrink and holds the arch well.
• Necessarily requires a Rubber Base underlayment.
• The wavelength for polymerization is 365-405 nm.
• The power of the UV/Led lamp is 36-48W.
• Permissible coating thickness: 0.5 mm at the end/ 1 mm at the apex.
• Complete polymerization 120 seconds.

Application method:

SPRAYING.

1. Removal.
2. Do not file the nail shape or leave 2 mm long, which will be removed after leveling.
3. File the nail with a 220 grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If we work with removers, wash our hands with soap and water after working with them.
6. Degrease the nail with Nail Prep LUNAmoon. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). First approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it, and wipe everything in the cuticle area and in the sinuses.
7. We can use a primer if we wish, but if the base for the substrate is sufficiently acidic, it is not needed.
8. The Rubber Base LUNAmoon is best applied with a flat gel brush. The movements should be rubbing. Draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Remove the stickiness.
10. Level the gel, indent the cuticle 0.5-1 mm. Dry in the lamp for 60 seconds.
11. File the shape after leveling it. This is necessary to create a thickness at the edge of the nail that will hold the free edge.
12. If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material delamination. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, remove the stickiness and cover with gel polish.
14. Cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

CLASSIC EXTENSION

1. Removal.
2. Shorten the length of the nail to 1 mm and make a round shape.
3. File the nail without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100-grit buffer.
4. Do a manicure.
5. If we work with removers, wash our hands with soap and water after working with them.
6. Degrease the nail with Nail Prep LUNAmoon. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). First approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it, and wipe everything in the cuticle area and in the sinuses.
7. We use the LUNAmoon primer.
8. The Rubber Base LUNAmoon is best applied with a flat gel brush. The movements should be rubbing. Draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Remove the stickiness.
10. Set up a mold for building up the free edge of the nail.
11. Lay out the shape of the artificial nail with a transparent gel. Dry for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off the stickiness and excess dust.
14. Pass the Rubber Base LUNAmoon over the areas where the file was used one more time. Dry for 30 seconds.
15. Level it with gel, put it in the lamp, and hold it for 10-15 seconds. If the gel has a strong stickiness or contains glitter, hold it for 20 seconds.
16. Dry in the lamp for 120 seconds.
17. Remove the stickiness before covering with gel polish.
18. Cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

Product shelf life: 24 months. Store open for no more than 18 months.

TPO FREE
(Product photos on the website may differ from the actual product)